The ICO series of CO₂ incubators has seamlessly welded, corrosion-resistant stainless steel chambers with rounded edges and no further installations, ensuring easy and thorough cleaning.
Models have TwinDISPLAY with a USB port for uploading programs, reading out logs or protecting appliances via the user ID function, and an Ethernet interface as well as a data logger with a 10 year storage capacity.
All parameters can be set directly in the ControlCOCKPIT or the AtmoCONTROL software, which uses drag and drop symbols to input values.
Sterilisation cycle at +180°C for 60 minutes (without removing sensors).
Short recovery times, minimised risk of condensation in the interior and homogenous chamber atmosphere.
Fail-safe FDA-compliant logging of temperature, CO₂, O₂, humidity and open door time.
Visual and acoustic alarm, also alarm notification to mobile phones or e-mail address.
ntuitive, user friendly ControlCOCKPIT with two TFT displays shows all adjustable parameters.
Heated inner glass door, unit reaches set temperature faster.
Protocol log, uploading and implementing programs with remote access via Ethernet interface.
The software allows online monitoring of up to 32 connected appliances. Complex ramping processes can be programmed quickly and easily.
The SetpointWAIT function ensures the process time does not start before the set temperature is reached. In addition, an over-temperature monitor as well as two high grade PT100 platinum temperature sensors ensure mutual monitoring and operation transfer at the same working temperature in case of an error. CO₂ concentration is measured by a dual-beam IR sensor with barometric pressure compensation.
Supplied with manufacturer’s calibration certificate (data measured at the centre of the chamber at 37°C and 5% CO₂), but without perforated stainless steel shelves and stainless steel water dish.