Ultrasonic Bath, 9.2L, digital timer 1-99 min, continuous sound ultrasonic frequency 45 khz,500w x 135d x 150h (mm), 1 * 1 Item
Cleaning via ultrasound has been one of the most effective methods of freeing parts with complex geometry, such as fins, under cuts, bore holes or pocket holes from residues (contaminants).
High performance PZT ultrasonic converter with ceramics technology
Homogeneous distribution of ultrasound in the cleaning trough
Lower noise development through higher frequency
Robust heating with integrated run-dry protection
Thermostat adjustable up to 80 °C
Stainless steel tank material and cladding
The physical property of imploding vacuum bubbles causes tiny air bubbles to form in the cleaning fluid, which generate up to 1000 bar and 5000 °C when the forces implode and penetrate all small cavities. Combined with a cleaning agent geared to the type of contamination and the material to be cleaned, it is possible, through the cavitation forming on the part to be cleaned without any additional manual workload, to remove residues like oil carbon, incrustations, grease, oils, oxidation, paints, dust, rust and limescale quickly in a way that protects the material and does not leave behind any residual matter.
Ultrasonic bath USC T: This range has a digital timer 1 to 99 minutes in steps of 1 minute.